2 Troubleshooting
Cut Size Is Not Accurate
PC-P430
24
2 - 7 Cut Size Is Not Accurate
Is the indicator mounted correctly?
404018
2_7_1B
■
Check that the indicator is mounted in the correct
position. If not, cut a sheet with the backgauge in that
position, and measure the length of the cut sheet.
Adjust the position of the indicator so that the indicator
indicates that length.
There is a gap between the indicator and the scale.
Therefore, the value changes if looked at from different
angles. Look straight down the indicator to read the value
correctly.
Does the backgauge plate stick out?
2
3
1
4
6
7
3
5
404018
2_7_1A
■
The backgauge plate
3
is pressed against the frame
4
by the spring. If there is a gap between the backgauge
plate and the frame, the cut size differs from the length
indicated by the indicator. If there is a gap, check the
following:
The three slide shafts
1
are locked on the backgauge plate.
The two bearings
2
are mounted correctly.
Nothing is between the backgauge plate
3
and the frame
4
.
The bottom of the backgauge plate
3
does not rub the
grooves on the back table
5
.
The two knurled knobs
6
are not loosened.
The spring
7
is mounted correctly.
Lever
Indicator
No gap
Not rubbing
the grooves
Summary of Contents for PC-P430
