Treadmill Motor Will Not Start
Possible causes:
•
Verify that all wire connections are properly connected.
•
Follow the auto-calibration instructions (reference auto-calibration in table of
contents).
•
Verify the Engineering LED’s on the lower board. Reference Engineering LED
chart for possible causes.
•
Measure voltage from motor (reference voltage checkpoints in table contents). If
no voltage is present, unplug the treadmill and visually inspect the motor brushes
and springs to make sure they are installed properly. Repeat voltage reading if
necessary.
•
If problem persists, replace the lower board.
40
Summary of Contents for ELITE 1.1T
