Horizon Fitness ELITE 1.1T, Service Manual

Page: 9 / 75

PREVENTATIVE MAINTENANCE PROCEDURES
Cleanliness of your Horizon Fitness treadmill and its operating environment will keep maintenance
problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the
following preventive maintenance schedule be followed.
After Each Use
•
Turn off the treadmill with the on/off switch, and unplug the power cord from the wall
outlet.
Warning!
To remove power from the treadmill, the power cord must be disconnected from the wall outlet.
•
Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.
Never use solvents, as they can cause damage to the treadmill.
•
Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
•
Make sure the power cord is not underneath the treadmill or in any other area where it can
become pinched or cut.
•
Check the tension and alignment of the running belt. Make sure that the treadmill belt will
not damage any other components on the treadmill by being misaligned
Every Week
Clean underneath the treadmill, following these steps:
•
Turn off the treadmill with the on/off switch, and then unplug the power cord at the wall
outlet.
•
Fold the treadmill into the upright position; making sure that the lock latch is secure.
•
Move the treadmill to a remote location.
•
Wipe or vacuum any dust particles or other objects that may have accumulated underneath
the treadmill.
•
Return the treadmill to its previous position.
Every Month
•
Inspect all assembly bolts of the machine for proper tightness.
•
Remove the motor cover and clean the motor and lower board area to eliminate any lint or
dust particles that may have accumulated. Failure to do so may result in premature failure
of key electrical components.
Each 6 months
•
Add lubrication to deck and running belt. Use lubrication provided by Horizon Fitness
only!
•
Lubricate the air shocks with a Teflon based spray
9