Horizon Fitness ELITE 1.1T, Service Manual, Page: 32 / 75

Eng4 – Roller Diameter Check
Important Note: It is important to verify proper roller values as improper values can create inaccurate
speeds.
Roller V alues:
Elite 1.1T = 1481
Elite 2.1T = 1481
Elite 3.1T = 1481
Elite 4.1T = 1952
Elite 5.1T = 1972
1.1T
a) While in the Engineering Mode Menu, press Speed “+” or “- “ until Eng4 appears in the display.
b) Press, “S tart” to select.
c) Press Speed “+” or “-“ until proper value is reached. (Please refer to chart above for value)
d) Press and hold “S tart” for 3 – 5 seconds until the console beeps 3 times. The value has now been
properly saved.
2.1T, 3.1T
a) While in the Engineering Mode Menu, press the Speed “
∧
” or “
∨
“ button until Eng4 appears in
the display.
b) Press, “S tart” to select.
c) Press Speed “
∧
” or “
∨
“ until proper value is reached. (Please refer to chart above for value)
d) Press and hold “S tart” for 3 – 5 seconds until the console beeps 3 times. The value has now been
properly saved.
4.1T, 5.1T
a) While in the Engineering Mode Menu, press the Speed “
∧
” or “
∨
“ button until Eng4 appears in
the display.
b) Press, “Select” to select.
c) Press Speed “
∧
” or “
∨
“ until proper value is reached. (Please refer to chart above for value)
d) Press and hold “S tart” for 3 – 5 seconds until the console beeps 3 times. The value has now been
properly saved.
32