DeltaMyc Operation Manual J810018 (7 Oct 2014)
Operation
3-21
The hardware tree controls become available.
Set anchor point
First, choose an area of interest on the sample.
1
Place the sample under the microscope.
2
Check that the objective value in the hardware
tree reflects the current microscope objective.
3
Click the Set Anchor control.
The
Select position
window appears (Fig. 21). The purpose of this window is to
store the location and the picture of the area of the sample that is to be mapped.
Fig. 21.
Select position
window.
4
When you press the OK button, the current in-
formation is stored as the Anchor.
5
Adjust the lighting and the microscope path to
get an appropriate live image of the sample.
6
To reach the appropriate position, click on the
image on the location of interest, and wait until
the sample is positioned under the pinhole im-
age.
