S
YSTEM
P
ARAMETERIZATION AND
O
PERATION
60 / 157
System 6844(RC) - V03.00
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
After the first and second incorrect entry the following display appears for 5 seconds:
Display frame:
W R O N G K E Y W O R D
After the third incorrect entry the following display appears for 5 seconds:
Display frame:
W R O N G K E Y W O R D
! L A S T T R Y !
After the fourth incorrect entry the following display appears for 5 seconds:
Display frame:
K E Y P A D B L O C K E D
F O R 4 H O U R S !
When the next attempt is made to start the menu the following display appears:
Display frame:
K E Y P A D B L O C K E D
F O R 4 H O U R S !
No further entries can be made for four hours. Switching the System on and off does not de-
lete the lockout time.
In this condition the System remains fully functional as before. The display reverts back to
the standard frame automatically after four minutes or by pressing the
BR
key.
5.3
SHOW Menu - Display of the System 6844(RC) Base Settings
The
SHOW
function is called up to check the values entered or the values updated via the
GPS receiver. The values are only displayed here and cannot be changed.
After selecting the main menu by pressing
ENT
the figure
2
is entered. The first
SHOW
selection frame appears.
Use the
+
and
-
keys to scroll up and down on menu level.
The
SHOW
menu selection frames are output on the display. The menu is controlled as fol-
lows:
The next selection frame is displayed by entering
ENT
or
N
.
The corresponding display frame is called up by entering
Y
.
The display jumps to the next selection frame if
ENT
or
N
are entered in the
display frame.
The
SHOW
menu can be exited at any time by pressing
BR
.
After selecting the desired display frame, you can update the displayed pa-
rameters by pressing
Y
.
The individual functions of the System 6844(RC) are explained below.
