Honeywell TH8320R1003 Installation Manual Download Page 98

Page: 98 / 140

VISIONPRO

8000 WITH REDLINK™

68-0312—03

When the user touches

Press HERE for info

on the

Home Screen, the reminder message will be displayed.

Fig. 254.

Pressing Select displays options for addressing the Fall

Service Reminder message:

• View More Info

• Remind Me Later

• Dismiss

• View Dealer Info

Fig. 255.

Selecting View More Info displays the Fall Service

Reminder message.

Fig. 256.

10.

To clear the Alert, (and turn off the Red Alert Light on the

thermostat), select Dismiss.

To create a new custom reminder:

Touch

Press HERE to edit

at ISU 1200 (see Fig. 248).

Press up or down arrows until Custom Reminder is dis-

played, then press Next (Fig. 257).

Fig. 257.

Touch

Press HERE to edit

to set the name of the

reminder (Fig. 258).

Fig. 258.

Use the arrows, Delete, and Space buttons to enter the

name of the reminder, and press Done.

Fig. 259.

Scroll to see:

Your system needs

to be serviced to

prepare for the

upcoming fall

season. Please

call your dealer.

Summary of Contents for TH8320R1003













































































































































Search results

Summary of Contents for TH8320R1003

Reviews:

Honeywell TH8320R1003, Installation Manual, Page: 98 / 140

Search results

Summary of Contents for TH8320R1003

Reviews: