VISIONPRO
®
8000 WITH REDLINK™
15
68-0312—03
2.
While the Press Connect message is displayed (listening
mode), press and quickly release the CONNECT button
on each new RedLINK accessory.
NOTE: For locations of CONNECT buttons on
RedLINK accessories, see “Locating the Con-
nect Buttons on RedLINK Accessories” begin-
Fig. 35. Thermostat in listening mode.
3.
After a short delay (up to 15 seconds), check thermostat
to confirm the connection of each RedLINK accessory.
Touch
or
to review the list.
Fig. 36. Outdoor sensor added.
4.
Touch Done at the thermostat after all new RedLINK
accessories are connected.
NOTE: Thermostat displays a countdown timer while in
the listening mode. If it detects no activity for 15
minutes, it exits listening mode.
Completing Initial Setup
5.
Finish the setup by selecting the desired options. Touch
Done after you select the last option you want to change.
Fig. 37. Thermostat type.
The thermostat now displays its Home screen and the
thermostat setup is complete.
Fig. 38. Thermostat home screen.
Adding RedLINK Accessories to the
Thermostat
If you want to add RedLINK accessories after the thermostat
has been setup, follow these steps.
1.
Touch Menu.
2.
Select Installer Options.
Fig. 39.
3.
Enter password (date code) and touch Done. See “Find-
ing Your Password (Date Code) to Access Installer
Options” beginning on page 19 for more information.
Fig. 40.
Press Connect on
New Accessories.
MCR33972
Outdoor Sensor
has been added
M34150
THERMOSTAT TYPE
programmable
M33985
MCR33976
Installer Options
MCR33977
Enter password
0
0 0 0