Honeywell TH8320R1003 Installation Manual Download Page 100

Page: 100 / 140

VISIONPRO

8000 WITH REDLINK™

68-0312—03

100

12.

When the user touches

Press HERE for info

on the

Home Screen, the reminder message will be displayed:

Fig. 266.

13.

Pressing Select displays options for addressing the Cus-

tom Reminder message:

• View More Info

• Remind Me Later

• Dismiss

• View Dealer Info

14.

Selecting View More Info displays the Custom Reminder

message.

Fig. 267.

15.

To clear the Alert (and turn off the red alert light on the

thermostat), select Dismiss.

MICROSD CARD

Use a microSD (secure digital) card to save setup time by

loading Installer Setup settings, Dealer Information, Holiday

Schedules, and Custom Reminders to multiple thermostats.

The microSD card plugs into the thermostat. You will then need

a USB adapter to plug the microSD card into your computer.

These adapters are inexpensive and widely available at

electronics retailers and online.

For troubleshooting help, you can save the thermostat Data

Logs (Alerts Log and Interaction Log) to a microSD card - then

view them on your computer. Also use the microSD card to

upgrade the thermostat software.

Visit

http://thermostatsetup.honeywell.com

to enter your dealer

information or load new thermostat software.

Updating Thermostat Software

New thermostat software can be saved to a microSD card and

then uploaded to the VisionPRO® thermostat using the

microSD port.

In a web browser on your computer, go to

http://thermostatsetup.honeywell.com

Connect a microSD card to a USB adapter. Then con-

nect the USB adapter to your computer.

Fig. 268.

Download the software upgrade file to the microSD USB

adapter by clicking the indicated link on the web site.

When the File Download box opens, click Save.

When the Save As box opens, navigate to the directory

of your USB device and save the file. For example, if your

USB drive is letter “F”, navigate to “My Computer” and

then drive “F”.

After the file is saved, remove the microSD card from the

adapter and connect it to the thermostat. Then select the

“Software Update” option on the thermostat.

Fig. 269.

See “To Use the MicroSD Card in the Thermostat” on

page 101.

Loading Dealer Information

VisionPRO thermostats can display the dealer's contact

information on the screen, making it easy for users to contact

them for post-sale support and service. After saving the

dealer's contact information to a microSD card, the dealer can

upload this information to the VisionPRO thermostat using the

microSD port.

In a web browser on your computer, go to

http://thermostatsetup.honeywell.com

Enter your dealer information into the text boxes pro-

vided on the web site.

Connect a microSD card to a USB adapter. Then con-

nect the USB adapter to your computer. See Fig. 268.

Download the dealer information file to the microSD USB

adapter by clicking the indicated link on the web site.

When the File Download box opens, click Save.

Scroll to see:

Call XYZ for

Indoor Quality

Solutions

Computer

USB Adapter

MicroSD Card

Summary of Contents for TH8320R1003













































































































































Search results

Summary of Contents for TH8320R1003

Reviews:

Honeywell TH8320R1003, Installation Manual, Page: 100 / 140

Search results

Summary of Contents for TH8320R1003

Reviews: