Honeywell
Control Panel
35
8
8. CONTROL PANEL
8.1 GENERAL
The SmartVFD COMPACT API Full and API Limited versions have similar control
panels. The panel is integrated to the drive consisting of corresponding application
card and an overlay on the drive cover with status display and button clarifications.
The Control panel consists of an LCD display with backlight and a keypad including
a navigation wheel, a green START button and a red STOP button (see Figure 8.1).
8.2 DISPLAY
The display includes 14-segment and 7-segment blocks, arrowheads and clear text
unit symbols. The arrowheads, when visible, indicate some information about the
drive, which is printed in clear text on the overlay (numbers 1…14 in the figure be-
low). The arrowheads are grouped in 3 groups with the following meanings and Eng-
lish overlay texts (see Figure 8.1):
Group 1 - 5; Drive status
1 = Drive is ready to start (READY)
2 = Drive is running (RUN)
3 = Drive has stopped (STOP)
4 = Alarm condition is active (ALARM)
5 = Drive has stopped due to a fault (FAULT)
Group 6 - 10; Control selections
6 = Motor is rotating forward (FWD)
7 = Motor is rotating reverse (REV)
8 = I/O terminal block is the selected control place (I/O)
9 = Keypad is the selected control place (KEYPAD)
10 = Fieldbus is the selected control place (BUS)
Group 11 - 14; Navigation main menu
11 = Reference main menu (REF)
12 = Monitoring main menu (MON)
13 = Parameter main menu (PAR)
14 = Fault history main menu (FLT)
