Honeywell HX2, Reference Manual

Page: 263 / 310

WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
l
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to LEAP
l
Set Encryption to WPA TKIP
l
Set Auth Type as follows:
l
If the Cisco/CCX certified AP is configured for open authentication, set the Auth Type radio parameter to
Open .
l
If the AP is configured to use shared key or passphrase, set the Auth Type radio parameter to Shared .
l
If the AP is configured for network EAP only, set the Auth Type radio parameter to LEAP .
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as
detailed in this section.
See Sign-On vs. Stored Credentials for information on entering credentials.
6-33