Honeywell HX2, Reference Manual

Page: 137 / 310

Status Popup
Options on this tab configure the Status Popup window. When the Status popup window is displayed, it is placed on top of the
window in focus and hides any data beneath it. It is closed by pressing the assigned Status User or Status Admin key
sequence.
Using the key mapping control panel, the System Administrator must first assign a Status User key sequence for the end-user
when they want to toggle the Status Popup Window on or off.
The System Administrator must also assign a Status Admin key sequence to perform the same function. Status popup
window display options (taskbar icons) are assigned on the Status Popup tab, e.g., AC Power, ActiveSync, WLAN radio,
CapsLock, Network status, Bluetooth status.
The default for the User and Admin status popup windows is to show all status information. The 5 second timeout to remove
the status popup from the display is disabled by default for the User and Admin status popup windows.
In addition to the configurable options, the Status Popup displays memory status information at the bottom of the popup
window. The following information is displayed:
ml Memory Load
Number indicating the estimate of current memory use, between 0 (no memory use) and 100 (full
memory use)
tp
Total Physical
memory
Bytes of total physical memory
ap
Available Physical
memory
Bytes of available physical memory
tv Total Virtual memory
Total bytes that can be described in the user mode portion of the virtual address space of the
calling process.
av
Available Physical
memory Bytes of unreserved and uncommitted memory in the user mode portion of the virtual address
space of the calling application.
4-95