manualshive.com logo in svg

Honeywell HX2, Reference Manual

The Honeywell HX2 is a superior product designed to enhance productivity and efficiency. To fully utilize its potential, make sure to download the comprehensive Reference Manual, available for free on our website. Discover all the features and capabilities of the Honeywell HX2 by accessing the manual directly from manualshive.com.

Share
Download
background image

Message

Explanation and/or corrective action

Level

Registry read failure

The registry read failed. The registry information read when this message is logged is the
application information. It the Administration key cannot be opened or if the AppName
value is missing or empty, this error is logged. The other application information is not
required. If the AppName value is not available, AppLock cannot switch into user mode.

LOG_ERROR

Reset system work area
failure

The system work area is adjusted when in user mode to cover the taskbar area. The
system work area has to be adjusted to exclude the taskbar area in administration mode.
AppLock was unable to adjust this area.

LOG_ERROR

Shift pressed

The Shift key has been pressed and trapped by the HotKey processing.

LOG_EX

Shift

Processing the hotkey and backdoor entry

LOG_EX

Show taskbar

The taskbar is now being made visible and enabled.

LOG_
PROCESSING

Switching to admin-
backdoor

The system is currently in user mode and is now switching to admin mode. The switch
occurred because of the backdoor key presses were entered by the administrator.

LOG_
PROCESSING

Switching to admin-
hotkey press

The system is currently in user mode and is now switching to admin mode. The switch
occurred because of a hotkey press by the administrator.

LOG_
PROCESSING

Switching to admin-
kbdhook.dll not found

The keyboard hook load failed, so AppLock switches to admin mode. If a password is
specified, the password prompt is displayed and remains until a valid password is
entered.

LOG_
PROCESSING

Switching to admin-
keyboard hook
initialization failure

If the keyboard hook initialization fails, AppLock switches to admin mode. If a password is
specified, the password prompt is displayed and remains until a valid password is
entered.

LOG_
PROCESSING

Switching to admin-
registry read failure

See the explanation of the “Registry read failure” above. AppLock is switching into Admin
mode. If a password has been configured, the prompt will be displayed and will not be
dismissed until a valid password is entered.

LOG_
PROCESSING

Switching to
TaskbarScreenMode

In administration mode, the taskbar is visible and enabled.

LOG_EX

Switching to user mode

The registry was successfully read and AppLock is starting the process to switch to user
mode.

LOG_
PROCESSING

Switching to user-hotkey
press

The system is currently in admin mode and is now switching to user mode. The switch
occurred because of a hotkey press by the administrator.

LOG_
PROCESSING

Taskbar hook failure

AppLock is unable to control the taskbar to prevent the locked application from re-
enabling it.

LOG_ERROR

Taskbar hook OK

AppLock successfully installed control of the taskbar.

LOG_EX

Timeout looking for app
window

After the application is launched, AppLock must wait until the application has initialized
itself before proceeding. The application did not start successfully and AppLock has timed
out.

LOG_ERROR

ToUser after admin, not
at boot

The user mode switch is attempted when the device boots and after the administrator
presses the hotkey. The mode switch is being attempted after a hotkey press.

LOG_EX

ToUser after admin-app
still open

The switch to user mode is being made via a hotkey press and the administrator has left
the application open and has not made any changes in the configuration.

LOG_EX

ToUser after admin-no
app or cmd line change

If user mode is being entered via a hotkey press, the administrator may have left the
configured application open. If so, AppLock does not launch the application again unless
a new application or command line has been specified; otherwise, it just locks it.

LOG_EX

Unable to move desktop

The desktop is moved when switching into user mode. This prevents them from being
visible if the application is exited and restarted by the timer. This error does not affect the
screen mode switch; processing continues.

LOG_ERROR

4-60

Summary of Contents for HX2























































































































































































































































































































Reviews:

No comments

Related manuals for HX2

ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Intel SRCSASBB8I - RAID Controller Hardware User'S Manual preview
SRCSASBB8I - RAID Controller
Brand: Intel Pages: 36
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
ATEN Slideaway CL1008 User Manual preview
Slideaway CL1008
Brand: ATEN Pages: 77
INNOSILICON T3-43T User Manual preview
T3-43T
Brand: INNOSILICON Pages: 11
NZXT RESPIRE T40 Manual preview
RESPIRE T40
Brand: NZXT Pages: 2
Softing TH LINK Installation Manual preview
TH LINK
Brand: Softing Pages: 16
Intel Core 2 Duo E4300 Design Manual preview
Core 2 Duo E4300
Brand: Intel Pages: 55
Allied Telesis AR440S Hardware Reference Manual preview
AR440S
Brand: Allied Telesis Pages: 44
Agilent Technologies 72B Command Reference Manual preview
72B
Brand: Agilent Technologies Pages: 458
Balluff BNI EIP-508 05-Z015 Series User Manual preview
BNI EIP-508 05-Z015 Series
Brand: Balluff Pages: 74
Motorola MC68VZ328 User Manual preview
MC68VZ328
Brand: Motorola Pages: 376
Motorola MC68341 User Manual preview
MC68341
Brand: Motorola Pages: 20
TYAN P1103 Manual preview
P1103
Brand: TYAN Pages: 32
EZCast M2 User Manual preview
M2
Brand: EZCast Pages: 27
Johnson Controls MS-NAE5510-3 Installation Manual preview
MS-NAE5510-3
Brand: Johnson Controls Pages: 28
Swann NVR-7072 Instruction Manual preview
NVR-7072
Brand: Swann Pages: 30

Brands by name

Popular brands

Load more brands