manualshive.com logo in svg

Honeywell HX2, Reference Manual

The Honeywell HX2 is a superior product designed to enhance productivity and efficiency. To fully utilize its potential, make sure to download the comprehensive Reference Manual, available for free on our website. Discover all the features and capabilities of the Honeywell HX2 by accessing the manual directly from manualshive.com.

Share
Download
background image

Bluetooth Beep and LED Indications

Beep Type from Bluetooth Device

Behavior

Acknowledge label

1 beep

Label rejected

2 beeps at low frequency

Transmission error

Beep will sound high-low-high-low

Link successful

Beep will sound low-medium-high

Link unsuccessful

Beep will sound high-low-high-low

LED on Bluetooth Device

Behavior

Yellow LED blinks at 2 Hz

Linking in progress

Off

Disconnected or unlinked

Yellow LED blinks at 50 Hz

Bluetooth transmission in progress

Yellow LED blinks at the same rate as the paging beep (1 Hz) Paging

Green LED blinks once a second

Disabled indication

Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic Selftest and has entered
isolation mode. If the scanner is reset, the sequence is repeated. Contact

Technical Assistance

for help.

Bluetooth Printer Setup

The Bluetooth managed device should be as close as possible, in direct line of sight, with the HX2 during the pairing process.

1. Open the LXEZ Pairing Panel.

2. Tap

Discover

. Locate the Bluetooth printer in the Discovery panel.

3. Tap and hold the stylus (or doubletap) on the Bluetooth printer ID until the right-mouse-click menu appears.

4. Select

Pair as Printer

to pair the HX2 with the Bluetooth managed printer.

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.

Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on the manufacturer’s web site.
Contact

Technical Assistance

for Bluetooth product assistance.

Note:

If there is no beep or no LED flash from the Bluetooth managed printer, the HX2 and the printer are currently paired.

Easy Pairing and Auto-Reconnect

The Bluetooth module can establish relationships with new devices after the user taps the Discover button. It can auto-
reconnect to devices previously known but which have gone out of range and then returned within range.

See Also:

"Reconnect"

Note:

Configuration elements are persistent and stored in the registry.

Setup the Bluetooth module to establish how the user is notified by easy pairing and auto-reconnect events.

AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it stop other Bluetooth-enabled
devices from pairing with the HX2 while AppLock is in control.

4-82

Summary of Contents for HX2























































































































































































































































































































Reviews:

No comments

Related manuals for HX2

EAW MX8000 Technical Specifications preview
MX8000
Brand: EAW Pages: 2
IBM 8677 - BladeCenter Rack-mountable - Power... Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power...
Brand: IBM Pages: 126
Blackrock Microsystems Cerebus Instructions For Use Manual preview
Cerebus
Brand: Blackrock Microsystems Pages: 27
Lanner NCA-4035 User Manual preview
NCA-4035
Brand: Lanner Pages: 109
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Brand: ADC Pages: 130
Fieldbus Specialists AT-FBUS Getting Started preview
AT-FBUS
Brand: Fieldbus Specialists Pages: 39
impinj Speedway Revolution Installation And Operation Manual preview
Speedway Revolution
Brand: impinj Pages: 60
Intel i960 Jx Developer'S Manual preview
i960 Jx
Brand: Intel Pages: 578
Corsair LL140 RGB Series Manual preview
LL140 RGB Series
Brand: Corsair Pages: 30
Vista VIPER H4 User Manual preview
VIPER H4
Brand: Vista Pages: 93
Broadband Products Xtreme Networked Boat User Manual preview
Xtreme Networked Boat
Brand: Broadband Products Pages: 16
Grundfos CIM 060 Installation And Operating Instructions Manual preview
CIM 060
Brand: Grundfos Pages: 40
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Brand: Paradyne Pages: 28
National Instruments USB device 622x User Manual preview
USB device 622x
Brand: National Instruments Pages: 23
Valcom VIP-997 Manual preview
VIP-997
Brand: Valcom Pages: 4
JCAT FEMTO Quick Start Manual preview
FEMTO
Brand: JCAT Pages: 2
iTON ID6ZFN-BK0 User Manual preview
ID6ZFN-BK0
Brand: iTON Pages: 12
Tvone CORIOview MWP Series Quick Start Manual preview
CORIOview MWP Series
Brand: Tvone Pages: 24

Brands by name

Popular brands

Load more brands