Honeywell HVAC232 Series, Applications Manual, Page: 68 / 145

Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07 68
9.1.4 Ramps and brakes setup (Control panel: Menu PAR

P4)
Table 25. Ramps and brakes setup.
Code Parameter Min Max Unit Default ID Note
P4.1 Ramp S-shape 1 0,0 10,0 s 0,0 500
P4.2 Acceleration time 1 0,1 3000,0 s 3,0 103
P4.3 Deceleration time 1 0,1 3000,0 s 3,0 104
P4.4 Ramp S-shape 2 0,0 10,0 s 0,0 501
P4.5 Acceleration time 2 0,1 3000,0 s 10,0 502
P4.6 Deceleration time 2 0,1 3000,0 s 10,0 503
P4.7 Flux Braking 0 3 0 520
0
= Off
1 = Deceleration
2 = Chopper
3 = Full mode
P4.8 Flux Braking Current 0,5 × I
Nunit
2,0 × I
Nunit
A I
Nunit
519
P4.9 DC Braking Current 0,3 × I
Nunit
2,0 × I
Nunit
A I
Nunit
507
P4.10 Stop DC current time 0,00 600,00 s 0,00 508
0
= Not active
P4.11 Stop DC current frequency 0,10 10,00 Hz 1,50 515
P4.12 Start DC current time 0,00 600,00 s 0,00 516
P4.13 Accel2 Frequency Threshold 0,00 P3.2 Hz 0,00 527 0,00 = Disabled
P4.14 Decel2 Frequency Threshold 0,00 P3.2 Hz 0,00 528
0,00
= Disabled
P4.15 External Brake: Open Delay 0,00 320,00 s 0,20 1544
P4.16 External Brake: Open
Frequency limit 0,00 P3.2 Hz 1,50 1535
P4.17 External Brake : Close
Frequency limit 0,00 P3.2 Hz 1,00 1539