Honeywell HTR1, Installation And Operating Manual

Page: 40 / 44

Rev B 40 Document 800-00759
11/07
Specifications
Connector RCA (back panel input)
RCA (front panel output)
No video signal Auto detection, message displayed on the screen
VCR audio signal
Audio recording Two independent channels, recording continuously
Output level -7 dBm, 10K
Ω,
RCA Pin jack
Signal to noise ratio 60 dB
Frequency response 20 Hz to 20 kHz ± 3 dB
Audio distortion Less than 0.5%
Connector RCA
Text overlay
Title Up to 20 characters, user selectable
Time and date Real time clock with battery backup
and automatic Daylight Saving Time
AM/PM format, three letters for month
Vehicle GPS position Latitude and longitude (requires optional HTRGPS module)
Vehicle speed MPH or KPH (requires optional HTRGPS module)
Vehicle direction N/NE/E/SE/S/SW/W/NW (requires optional HTRGPS module)
Recorded signals
Number of trigger inputs Five
Text Three characters per signal, user
selectable
Input level Active high (12 VDC) or active low
(0 VDC), user selectable
Input protection Reverse polarity protection, 600W
transient protection
Speed indicator (optional - GPS module must be installed)
Range 0 to 255 MPH or KPH
Note Specifications are subject to change without notice.
Specification (cont’d) Description