Honeywell HTR1 Installation And Operating Manual Download Page 36

Page: 36 / 44

Rev B

Document 800-00759

11/07

System Operation

Viewing Images

Note

This VCR is not intended to be used as a playback unit. If you want to view
recorded video, remove the tape from this VCR and view it in another VCR.

You may want to review brief clips of recorded video to check settings and setup. To view
images in the vehicle:

Unlock and open the access panel on the front of the VCR enclosure.

Plug a monitor cable into the AUDIO/VIDEO output on the front panel of the VCR.

Plug the other cable end into the AUDIO/VIDEO IN connector on the back of a 12 VDC
or battery powered audio/video monitor.

Start the vehicle or press the

POWER

button for temporary power. The camera light

starts flashing and the VCR automatically starts recording after 10 seconds.
Temporary power puts the VCR into Record mode.

Press the

STOP

button if the VCR is recording.

Press the

REW

(rewind) or

(fast forward) button to search the tape for the desired

image(s).

Press the

PLAY

button to play back the tape.

WARNING!

Do not leave a tape in the VCR if storing the unit for extended
periods.

Summary of Contents for HTR1













































Search results

Summary of Contents for HTR1

Reviews:

Related manuals for HTR1

Brands by name

Popular brands

Honeywell HTR1, Installation And Operating Manual

Search results

Summary of Contents for HTR1

Reviews:

Related manuals for HTR1

Brands by name

Popular brands