manualshive.com logo in svg

Honeywell HTR1, Installation And Operating Manual, Page: 14 / 44

Share
Download
Honeywell HTR1 Installation And Operating Manual Download Page 14

Rev B

14

Document 800-00759

11/07

System Overview

Ease of Operation

•

Monitor video and audio output through front panel jacks for easy access

•

User friendly programing using the supplied infrared remote control and on-screen 
display

•

The VCR settings are saved for ten years without powering the unit

•

EP or SP recording speed (user programmable)

•

Four daily timers for programming VCR operation

•

Temporary power—using the POWER button—to remove tapes and program the 
VCR while the vehicle ignition is off

•

Automatically detects if the video signal from the camera is missing

GPS Module (Optional)

The HTRGPS module records vehicle speed without tapping into transmission speed 
sensors. The HTRGPS module sends vehicle position, bearing, and speed data via serial 
interface to the HTR1. 

Compatibility

The HTR1 is fully upgradeable to an HTR4 digital mobile system.

The HTR1 is fully compatible with previous Silent Witness mobile video installations such 
as the HTR62, SWS310, SWS210, and SWS210A mobile video systems. The HTR1 may be 
installed in existing non-Honeywell systems with minimal adjustment.

Summary of Contents for HTR1













































Reviews:

No comments