background image

Rev B

28

Document 800-00759

11/07

System Setup

The following tables describe the screen fields and how to use them.s

Reset system

Reset/Restore Defaults

, page 

28

Record and display GPS 
data

GPS Position On/Off

, page 

30

GPS Direction 

On/Off

, page 

30

Timers

Timer Start Times

, page 

30

Table 3-4

System Default Settings

Setting (cont’d)

To program, see section …

Table 3-5

Main Menu Fields

Name

Description and Use

Text Tip 

Bus ID (Title 
line)

A 20-character text line can be added to the recording to 
identify the bus. 

Use the 

Right

 and 

Left

 buttons on the remote to move the 

cursor between characters. Use the 

Up

 and 

Down

 buttons 

to cycle through the letters and numbers. 

Bus ID can contain capital letters 

to 

V

, and numbers from 

0

 to 

9

, plus the number symbol (

#

), the hyphen (

-

), the 

slash (

/

), and blank space. 

Bus ID On/Off

Enable 

 

or disable 

 

the Bus ID display by using the 

Up

 

and 

Down

 buttons.

Reset/Restore 
Defaults

Select this field 

 

and press 

POWER

 on the remote to 

restore default (initial) settings to all OSD menu fields.

Current Local 
Time 

Set and display the current local time in hours, minutes, 
and seconds. The 12-hour clock is used for all time 
settings. The seconds are automatically reset to 00 when 
the minute setting is changed. 

Use the 

Right

 and 

Left

 buttons on the remote to move the 

cursor between characters. Use the 

Up

 and 

Down

 buttons 

to cycle through the numbers. 

AM/PM 
Indicator

This field indicates whether the current time is AM or PM. 
See 

Table 3-3

 for the AM/PM symbols. 

DST Indicator

If the time being shown is Daylight Savings Time, the DST 
indicator appears next to the AM/PM Indicator. If the time is 
not Daylight Savings Time, then nothing appears. This is 
not an editable field. 

For more about Daylight Saving Time, see 

Daylight Saving 

Time Changeover Dates

, page 

31

.

There is no text-tip because 
this is not an editable field. 

Current Local 
Date

This field displays the current local date numerically in 
month, day, and year.

Use the 

Right

 and 

Left

 buttons on the remote to move the 

cursor between characters. Use the 

Up

 and 

Down

 buttons 

to cycle through the numbers.

BUS ID STRING

BUS ID ON/OFF

ENTER TO RESET DEFAULTS

LOCAL TIME

AM or PM

LOCAL DATE

Summary of Contents for HTR1













































Reviews: