HTR1 Installation and Operating Guide
Rev B
31
Document 800-00759
11/07
The following table indicates the March and November changeover dates from the year
2007 to 2017. The HTR1 DVR has settings for up to 2035.
Notes
If no timers are enabled—that is,
displays—the VCR responds to the ignition trigger
only.
When any timer is enabled, the VCR turns on with the ignition signal, but does not start
recording until the current time is within the Timer
Start
and Timer
Stop
times. The only
exception to this rule is if the stop time is earlier than the start time, the VCR records through
midnight, provided the vehicle is running.
Examples
11:00P 02:30A
means that the VCR starts recording at 11:00 PM and stops
recording at 2:30 AM, provided the vehicle is running.
To record for 23 hours and 59 minutes, set the start time to
12:05A
and the stop time
to
12:04A
.
When the timers are on, the VCR does not record unless the trigger is active (for example,
the bus ignition is on) or the delay-off time has not ended.
When two or more timers do not overlap in time, the VCR starts and stops according to the
timer schedule.
When two or more timers overlap chronologically, the earliest start time and the latest stop
times are considered.
Table 3-6
Daylight Saving Time Changeover Dates
Year
March date when clocks are
reset one hour forward
November date when clocks are
reset one hour back
2007
11
4
2008
9
2
2009
8
1
2010
14
7
2011
13
6
2012
11
4
2013
10
3
2014
9
2
2015
8
1
2016
13
6
2017
12
5
Summary of Contents for HTR1
