Honeywell HRSD4 User Manual Download Page 87

Page: 87 / 136

Configuration

Document 800-00919

Rev F

02/08

Caution

When changing the port settings, you must change the port
settings on a PC running RASplus as well. Refer to the RASplus
manual for details.

Save your changes and return to the Network Setup screen by highlighting

and pressing

. Select

Cancel

to exit the screen without saving the changes.

Setting Up LAN Connectivity Using the Current IP Address

Select

DHCP

from the Type field and highlight

to read the current IP Address of the

DVR configured by DHCP (Dynamic Host Configuration Protocol) network.

Figure 3-53

LAN (DHCP) Setup Screen

Setting Up LAN Connectivity Using ADSL

Select

ADSL

(PPPoE)

to set up the ADSL network. The LAN (ADSL) Setup screen

appears.

Note

ADSL and modem cannot be configured at the same time. If the
DVR is networked via modem, the

ADSL (PPPoE)

can not be

selected.

Summary of Contents for HRSD4









































































































































Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands

Honeywell HRSD4, User Manual

Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands