Honeywell HRSD4 User Manual Download Page 40

Page: 40 / 136

Configuration

Upgrading the Software

Note

Only the system administrator can upgrade the software.

The boxes beside the H/W Version and S/W Version fields display the hardware and
software version of the DVR.

Note

You can upgrade the software only in the System Information
Change screen.

To upgrade the software, connect to the DVR the USB device containing the
upgrade package file.

Highlight

Upgrade…

and press

. The System Upgrade screen appears (see

System Upgrade Screen

on page

). The screen displays the upgrade package

file name.

Note

If no hard disk drives are installed in the DVR, the

Upgrade…

button is disabled.

Note

If the file system on the USB-IDE hard disk drive or USB flash
drive is

NOT

FAT16 or FAT32 format, you need to format device

using FAT16 or FAT32 format.

Figure 3-9

System Upgrade Screen

Summary of Contents for HRSD4









































































































































Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands

Honeywell HRSD4, User Manual

Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands