Honeywell HRSD4, User Manual

Page: 83 / 136

Configuration
Document 800-00919 Rev F 83
02/08
Using the Network Setup Screen for Network Connection
Figure 3-50 Network Setup Screen
Setting the Connection Type
Select the field beside Connection . Press to toggle between LAN and Modem .
Note If the RS-232C port is being used for another device, you can not
use it for network setup. You must reset this connection. See
Communicating with External Devices Using the RS-232C Port on
page 60 .
Changing Network Passwords
Note These network passwords are case sensitive. The factory default
password for both the Network Administrator and the Network
User is
12345678
.
Changing the Admin Password
1. Highlight the field beside Admin Password and press . A virtual keyboard
appears.
2. Enter the current password.