Honeywell HRSD4 User Manual Download Page 34

Page: 34 / 136

Configuration

Connecting the Infrared Remote Control

Figure 3-2

Infrared Remote Control

If the Unit ID for the DVR is set to

, you can control that DVR with the infrared remote

control without any additional changes. (See

Figure 3-7

, the System Information

Change Screen, in this chapter for further information on setting the Unit ID.)

If the Unit ID is set from

, you must to press

on the remote control and number

button (1 to 4) in order to control that DVR. The

icon displays when the DVR can be

controlled by the infrared remote control.

If you set the Unit ID of two or more DVRs to

, you can control those DVRs with the

infrared remote control at the same time.

Note

The functions of the infrared remote control buttons are identical
to the functions of the front panel buttons.

Summary of Contents for HRSD4









































































































































Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands

Honeywell HRSD4, User Manual

Search results

Summary of Contents for HRSD4

Reviews:

Related manuals for HRSD4

Brands by name

Popular brands