86
Configuring Presets, Tours, Privacy Zones, Sectors, and Alarms
Setting the Security Level of a Privacy Zone
You can set the security level of a privacy zone to high or low.
If the security level is set to
High
, you cannot program the privacy zone at a
zoom level of more than 10×. The mask is increased in size after programming
and is temporarily increased in size when zooming in or out to prevent any
portion of the privacy zone from being viewed.
If the security level is set to
Low
, you can program the privacy zone at any zoom
level. The mask is increased in size after programming (but less than when the
security level is set to
High
) and is not temporarily increased in size when
zooming in or out.
To set the security level of a privacy zone:
1.
Click the
Live View
tab.
2.
In the
PTZ Settings
panel, in the
Preset Details
box, type
75
, and then
click
Goto
.
3.
Using the arrow keys on the PTZ controls (see
on
),
enter the 4-digit PIN (the default is
1000
), and then click
Iris Open
.
4.
Select
PrivZone Security
, and then click
Iris Open
to set the security level
to
High
(default) or
Low
.
At the prompt, select
Y
(yes) to continue, or press
N
(no) to cancel.
Summary of Contents for EQUIP Series
