![background image](http://html.mh-extra.com/html/honeywell/equip-series/equip-series_installation-and-configuration-manual_151497003.webp)
Document 800-04194V1 Rev A
iii
07/11
Important Safety Information
Before installing or operating the unit, read and follow all
instructions. After installation, retain the safety and operating
instructions for future reference.
1.
HEED WARNINGS
- Adhere to all warnings on the unit and in the operating
instructions.
2.
INSTALLATION
•
Install in accordance with the manufacturer’s instructions.
•
Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your
warranty.
•
Do not install the unit in an extremely hot or humid location, or in a place
subject to dust or mechanical vibration. The unit is not designed to be
waterproof. Exposure to rain or water may damage the unit.
•
Any wall or ceiling mounting of the product should follow the manufacturer’s
instructions and use a mounting kit approved or recommended by the
manufacturer.
3.
POWER SOURCES
- This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supplied to your facility, consult your product dealer or local power company.
4.
HEAT
- Situate away from items that produce heat or are heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers).
5.
WATER AND MOISTURE
- Do not use this unit near water or in an unprotected
outdoor installation, or any area classified as a wet location.
6.
MOUNTING SYSTEM -
Use only with a mounting system recommended by the
manufacturer, or sold with the product.
7.
ATTACHMENTS
- Do not use attachments not recommended by the product
manufacturer as they may result in the risk of fire, electric shock, or injury to
persons.
8.
ACCESSORIES
- Only use accessories specified by the manufacturer.
9.
CLEANING
- Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
10.
SERVICING
- Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
11.
REPLACEMENT PARTS
- When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards. Using replacement parts or
accessories other than the original manufacturers may invalidate the warranty.
Summary of Contents for EQUIP Series
