Honeywell EQUIP Series, Installation And Configuration Manual

Page: 55 / 148

EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 35
07/11
Figure 4-8 Tamper Detection and Deinterlacing Filter Settings Panels
PTZ Protocol Setup
In the PTZ Protocol Setup tab, you can set the camera address and protocol.
The following protocols are available:
• Pelco P
• Pelco D
• Diamond
• IntelliBus™ (recommended)
• VCL
• MAXPRO-mode
Figure 4-9 PTZ Configuration Panel
Set the Blur Threshold . Blur
can be affected by elements
such as water.
Set the Blinding Threshold .
Blinding applies to obstacles in
front of the camera lens.
Set the Scene Change
Threshold.