Honeywell EQUIP Series, Installation And Configuration Manual

Page: 124 / 148

104
System Administration and Equipment Handling
Configuring the User Login PIN
To enable/disable the user login PIN:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 75 , and then
click Goto .
3. Using the PTZ controls, enter the 4-digit PIN (default = 1000 ), and then
click Iris Open .
4. Click Iris Open to set user login PIN to Enabled or Disabled (default).
To change the user login PIN:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 75 , and then
click Goto .
3. Using the PTZ controls, enter the 4-digit PIN (default = 1000 ), and then
click Iris Open .
4. Using the down arrow on the PTZ controls, select 2 Change PIN , and then
click Iris Open .
5. Using the PTZ controls, enter a new PIN, and then click Iris Open .
6. Re-enter the PIN and then click Iris Open .
To recover a lost user login PIN:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 72 , and then
click Goto .
3. Write down the numbers that appear on the screen.
4. Contact Honeywell Technical Support to recover the PIN.
To reset the privacy zone password (IntelliBus™ or Diamond protocol
only):
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 75 , and then
click Goto .
3. Using the PTZ controls, enter the 4-digit PIN (default = 1000 ), and then
click Iris Open .
4. Using the down arrow on the PTZ controls, select 3 Reset Privacyzone
Password , and then click Iris Open .
The following message appears:
EXTREME CAUTION: This will reset the privacy zones password.
Are you sure you want to do this? Y/N