Honeywell ACS-8, Installation Instructions Manual

Page: 127 / 142

Installation Instructions / ACS-8 127
18.4 Technical data 026580, ACS-8 12V version
Rated operating voltage 12V DC
Operating voltage range 10V DC to 15V DC
Max. residual ripple of
supply voltage
35 mV
Current (typical) 200 mA
Max. current consumption with U_b 400 mA
Operating temperature range -0°C to +45°C
Storage temperature range -25°C to +70°C
Protection class according to DIN 40050 IP40
Environmental class according to VdS II
Contact rating of the relays 30V DC/1A
ACS-8 fuse Si1 1AT/250V
ACS-8 fuse Si2 1AF/250V
Dimensions of the housing in mm 250 x 210 x 100
If you use a 12V DC power supply, please observe that the output voltage must be free of ground
potential.
18.5 Technical data 026585, ACS-8 230V version
Rated operating voltage 230V AC
Operating voltage range 230V AC -15% to +10%
Power frequency 40 - 60Hz
Power consumption 100 VA
Max. current drain 1.5A
Dimensions of the housing in mm 350 x 280 x 100
Short-time continuous current drain 2.2A (5 min. max.)
Max. charging current 1.5A
Battery capacity admitted by VdS 40Ah
Number of connectable batteries Max. 2
Possible battery combinations 1 x 3.5 / 2 x 2.0 Ah to be integrated into device
2 x 10 / 2 x 16 / 1 x 25 / 1 x 40Ah separate case required
Current drain according to VdS for
60 hours:
approx. 650mA with 40Ah battery capacity
Permanent battery monitoring
Temperature-controlled battery charging current
Operating temperature range 0°C to +45°C
Storage temperature range -25°C to +70°C
Protection class according to DIN 40050 IP40
Environmental class according to VdS II
Dimensions of the board: 97.5 x 250mm
The other data are the same as for 026580.