121
MAINTENANCE
3. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
4. Use a 10 mm wrench to remove the
bolt holding the ignition coil.
Remove the ignition coil by pulling
it up slightly. Take care not give an
impact or drop the ignition coil.
Replace the ignition coil if drop it.
5. Use the spark plug wrench and 19
mm eye wrench to remove the
spark plugs.
6. Inspect the spark plugs.
(1) If the electrodes are heavily
corroded or carbon-soiled, clean
with a wire brush.
(2) Replace a spark plug if the
central electrode is worn.
The spark plug can wear out in
different ways.
If the sealing washer shows
signs of wear, or if the
insulators are cracked or
chipped, replace the spark plugs.
WIRE CONNECTOR
IGNITION COIL
BOLT
SPARK PLUG WRENCH
19 mm EYE
WRENCH
New plug
Plug needing
replacement
42ZVL600.book 121 ページ ２０１８年７月１９日 木曜日 午前９時６分
