HOLZMANN MASCHINEN KOS 3000C, User Manual

Page: 30 / 60

HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at Strana 30
OSCILAČNÍ HRANOVÁ BRUSKA / OSCILLATING EDGE BELT SANDER KOS 3000C
11.1 Technical Details
Specification KOS 3000C Specification KOS 3000C
Sanding table 960x350mm Voltage 400V
Table lift 230mm Speed 3000 min
-1
Sanding belt length 3000mm Oscillation motor power 250W
Sanding belt width 200mm Oscillation lift 20mm
Sanding unit flat, swiveling 1050х200mm Ø dust collector plug 120mm
Ø Sanding unit cylindrical 100mm Machine dimension 1700x950x1260mm
Sanding belt speed 20m/s Weight 345kg
Tilt range 90°-45° Sound pressure level L
PA
83dB(A)/K:2dB(A)
Motor power 3.0kW Sound power lever L
WA
101B(A)/K:2dB(A)
11.2 Electrical equipment
 Minimum voltage protection:
The machine stops if there is no voltage, but when it is restored the machine remains idle.
To start it up it should be proceeded like at initial start-up.
 Emergency stop on the main panel
 Protection nullification
 Motor overload protection : through in-built thermal contacts
 Protection class IP54
11.3 Workpiece dimensions
The maximal sizes of the details, which can be grinded, are 1050х350х150mm . If you grind
longer or wider details, then you have to support the details through rollers, which are option to
the machine.
The
minimal sizes of the detail are 100х30х15mm . The details with smaller dimensions can be
grinded only with helping device, for example: pushing block for grinding of the narrow details.