HOLZMANN MASCHINEN KOS 3000C, User Manual

Page: 32 / 60

HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at Strana 32
OSCILAČNÍ HRANOVÁ BRUSKA / OSCILLATING EDGE BELT SANDER KOS 3000C
12.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
 Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
 Make sure the work area is lighted sufficiently
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely
and keep balance at all times.
 Keep away from the running abrasive!
 Always stay focused when working. Reduce distortion sources in
your working environment. The operation of the machine when
being tired, as well as under the influence of alcohol, drugs or
concentration influencing medicaments is forbidden.
 Respectively trained people only and only one person shall
operate the machine.
 Do not allow other people, particularly children, to touch the
machine or the cable. Keep them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The
minimum safety distance is 2m
 Wear suitable work clothes! Do not wear loose
clothing or jewelry as they might get caught in
moving parts and cause severe accidents! Wear a
hair net if you have long hair.
 Use personal safety equipment: dust mask, ear protectors and
safety goggles when working with the machine.
 Never leave the machine running unattended! Before leaving
the working area switch the machine off and wait until the
machine stops.
 Always disconnect the machine prior to any actions
performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch