HOLZMANN MASCHINEN KOS 3000C, User Manual

Page: 43 / 60

HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at Strana 43
OSCILAČNÍ HRANOVÁ BRUSKA / OSCILLATING EDGE BELT SANDER KOS 3000C
14.4.3 Grinding of the details with square and rectangular forms
 Put the detail on the working table and you will grind it through pushing the detail to the
vertically placed grinding beam.
 Usually, the feeding is through hand, but there is possibility to use feeder.
 The grinding goes on the whole detail’s length.
14.4.4 Grinding of the details with rainbow- shaped
 Remove the protector.
 Put the detail on the side- table and the detail will be grinded when you touch the rotating
roller ø100.
14.4.5 Grinding of the veneer edges
 After making of the above-mentioned adjustment of the machine for this operation, put
the detail on the working table and push it to the both stoppers.
14.4.6 Banked grinding
 Release the handle А (fig. 8).
 Through the hand wheel В adjust to required angle using the measuring tape С .
 Locking the handle А .
 Put the detail D on the working table Е and clamp it to the grinding assembly F .