HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Strana 37
OSCILAČNÍ HRANOVÁ BRUSKA / OSCILLATING EDGE BELT SANDER KOS 3000C
13.2.4
Assembly of dismounted for transportation units
With view to the transportation and packaging, some parts of the machine are delivered in
unassembled condition
You will find hereafter instructions concerning the assembly of those parts.
13.2.5
Assemble the cylindrical grinding unit
Putting the lateral table
B
in hole of the support
C
and tighten with the handle
D
on desired height.
Mounting the protector
Е
and screw the handles
А
.
13.2.6
Connection to the aspiration device
The chip and dust aspiration device must ensure a minimal rate of air delivery of 1800
m3/h at a speed of 25-30 m/sec.
The dust and chips aspiration device must be
switched on simultaneously with the motor of
the machine.
The machine is supplied with two tips for
sucking out dust and chips.
Connect rubber materials ø120 mm toward tips
A in device for sucking out dust and chips and
bind fast them with clamps.
Summary of Contents for KOS 3000C
Page 60: ......
