Hog Technologies Stripe Hog SK3000, Operation Manual

Page: 54 / 108

54
General Maintenance
6.4 Stripe Hog Tractor
Proper engine and component maintenance is es-
sential to the performance and reliability of the
Stripe Hog tractor. You should perform all recom-
mended maintenance according to John Deere’s
specifications. Maintenance schedules and proce -
dures are outlined in the tractors owner’s manual
and the System Maintenance Matrix in this section.
They should be followed exactly.
Daily Inspection:
• Fuel, oil, coolant leaks.
• Loose bolts, electrical connections.
• Worn belts.
• Trash build up.
• Fuel, lube oil, and coolant levels.
• Air cleaner.
• Hydraulic fluid reservoir level and hydraulic
lines for leaks.
• Lubricate and service the Hog Arm and Hog
Head as stated in this section.
6.5 Hog Head & Hog Arm Maintenance
Hog Head
The Hog Head must be inspected daily and ser-
viced as required.
The following service procedures apply.
• Grease the thru-shaft bearings daily with the
lube specified in the lubrication chart.
• Clean and grease wheels and caster assem -
blies weekly.
• Check wheel casters for height and excessive
wear. Add shims to adjust if necessary.
• Check the wear brush for wear and proper
adjustment daily. Adjust and replace as nec-
essary.
• Check all bolts and wheel nuts for anything
loose.
• Check hydraulic and high pressure hoses for
deterioration and wear daily. Correct problems
or replace questionable components before
waterblasting.
Stripe Hog Tractor
Hog Head