Hog Technologies Stripe Hog SK3000, Operation Manual

Page: 25 / 108

25
SK3000 Systems
head to be immediately reduced to less than 100
PSI (7 Bar) at any time without causing damage
to the high pressure lines and components.
Maximum operating pressure for the UHP pump
of 40,000 PSI (2,758 Bar) @ 6 gallons (22 Li-
ters) per minute is achieved at maximum engine
RPM. (typically 2200 RPM) The water pressure
is monitored by the High Pressure gauge on the
pump and controlled by the RPM of the engine
or by adjusting the manual bypass valve on the
pump. Since engine RPM also controls the level of
vacuum, adjusting the pressure using the manual
bypass valve is beneficial when maximum engine
RPM is required for vacuum and less than maxi -
mum waterblasting pressure is required for the
Dump Valve
Tractor Dump Valve
High Pressure Pump, Pressure Gauge, PTO Engagement Handle and Manual Bypass Valve