Hog Technologies Stripe Hog SK3000, Operation Manual

Page: 43 / 108

43 43
WARNING
4.1 Hog Tools (Optional)
Hog Technologies builds a variety of useful tools
called Hog Tools that can be used with your
SK3000 Skid system. The most common tools
are the HT1100 Hog Waller, HT1000 Ground Hog
and the HT100 Hand Hog. These tools require
the HT500 Hog Pack in addition to the SK3000
to provide hydraulic and 12-volt electrical power
to the tool.
This section provides a brief overview of how these
tools work with the Sk3000 for your information.
An operating manual that ships with each Hog Tool
provides more detailed information on the opera-
tion, safety and maintenance. Handheld, ultra
high pressure waterblasting tools can be extreme-
ly dangerous if they are not used properly and all
safety precautions followed. You should read the
operating manual for each tool and completely
understand the operation, maintenance and all
safety precautions before operating the tool.
Section 4:
INjURIES FROM ULTRA HIGH PRESSURE wATERBLASTING
cAN BE VERY SERIOUS AND RESULT IN FATAL INjURIES.
PROPER OPERATION OF HIGH PRESSURE wATERBLASTING
TOOLS IS ESSENTIAL, PARTIcULARLY wITH HANDHELD UNITS
BEcAUSE THE OPERATOR IS cLOSE TO THE BLAST HEAD.
THE FOLLOw PREcAUTIONS APPLY:
• ALwAYS THE FOLLOw SAFETY GUIDELINES LISTED THE
HOG TOOL OPERATION MANUALS.
• MAKE SURE ALL SUPPORT PERSONNEL ARE A SAFE
DISTANcE FROM THE wORK AREA BEFORE THE PRESSURE
PUMP IS ENGAGED.
• MAKE SURE THAT THE OPERATOR HAS READ THE MANUAL
FOR THE TOOL AND HAS BEEN TRAINED IN THE PROPER
USE OF HANDHELD wATERBLASTING EqUIPMENT.
• MAKE SURE THE OPERATOR AND ALL PERSONNEL ARE
EqUIPPED wITH REqUIRED SAFETY EqUIPMENT INcLUDING
HARD HATS, GLOVES, EYE AND EAR PROTEcTION, ETc.
• NEVER PUT HANDS, FEET OR ANY PART OF YOUR BODY
IN OR NEAR THE HIGH PRESSURE STREAM.
• NEVER ALLOw AN INEXPERIENcED PERSON TO OPERATE
A HANDHELD, HIGH PRESSURE wATERBLASTING TOOL
wITHOUT PROPER TRAINING.
Hog Technologies Hog Tools
HT1000 Ground Hog
HT100 Hand Hog
HT500 Hog Pack
HT1100 Hog Waller