Hoffrichter 5CPD10, User Manual, Page: 81 / 130

Chapter 6: Operating the Device 81
Parameter
Setting range CP
AP
AP
AP
A-
S
Description S T ST
Low Pressure Tolerance
1 – 10 hPa
• • • • • •
If the measured pressure is lower
than the set pressure minus the set-
ting “Low Pressure Tolerance”, the
“Low pressure” message is issued.
Changing comfort or therapy parameters
Change a comfort or therapy parameter as follows:
1. On the home screen, navigate to “Parameter” and press the MFK.
2. The parameter screen is split up into the “Com-
fort” and “Therapy” areas.
Press the Escape key to reach the “Comfort”
area, for example, from the default selected
area.
Please note: Depending on the user profile, the
selected profile differs. In clinic mode, “Ther-
apy” is selected by default, while “Comfort”
is the default setting in home mode.
Navigate to the “Therapy” area and press the
MFK.
ST
Tuesday l 22.03.2017 l 20:36
40
30
20
10
0
Soft Start Time
Soft Start Init. Pres.
Mask Test
Start Stop Automatic
Autostart Flow
Stop Automatic Delay
3 min
4,0 hPa
Off
Off
Medium
5 s
Comfort Therapy
3. Navigate to the desired therapy or warning
parameter and press the MFK to confirm your
selection.
4. Change the setting and press the MFK to con-
firm.
ST
Tuesday l 22.03.2017 l 20:36
40
30
20
10
0
Komfort
Bilevel ST
20,0 hPa
5,0 hPa
12 bpm
3,0 s
4,0 s
0,4 s
Therapie Comfort
Modus
IPAP
EPAP
Frequency
Time Inspiration
Ti Max
Ti Min
ST
20,0 hPa
5,0 hPa
12 bpm
3,0 s
4,0 s
0,4 s
Therapy