Hoffrichter 5CPD10, User Manual

Page: 70 / 130

70 Chapter 6: Operating the Device
To enable a screen:
1. Navigate to the desired screen by turning
the MFK.
Selected screen symbol
→
black
Symbol not selected
→
blue
ST
Tuesday l 22.03.2017 l 20:36
40
30
20
10
0
Parameter Monitoring Reports System
40
30
20
10
0
Humidifier
09:25
Alarm Clock
2. Press the MFK to activate the selected screen.
Changing the display mode
In the factory state, the screen switches automatically 2 minutes after the last operation
to the home screen :
•
In clinic mode during therapy to the measurement screen
•
Generally in home mode, or when therapy is switched off, to the home screen
The time for changing the display can be modified on the system screen. If you do not
want the screen to change automatically, set the parameter to "Off".
Standby screen
On the system screen, under “Standby” you can
set or disable the time for switching to the standby
screen. After the set time lapses, the screen auto-
matically switches to the standby screen. By press-
ing the home key, escape key or the MFK, you can
return to the most recent screen.
If the device is in standby, therapy can be started
or stopped with the on/off key without disabling
the standby screen.
Messages can also be hidden in standby mode by
pressing the MFK.
20:36
Tuesday, 22.03.2017
Figure 33:
Standby screen