HV350 Mini Frequency Inverter User Manual
51
The setting frequency source of the inverter can be switched between the
main
frequency and
（
Main fre Auxiliary
frequency） with the external terminal defined
by P6 Group parameter.
6
：
switch between Main frequency and
（
Main frequency - Auxiliary
frequency）
The setting frequency source of the inverter can be switched between the
main
frequency and
（
Main frequency - Auxiliary
frequency） with the external terminal defined
by P6 Group parameter.
7
：
MAX
（
Main frequency
，
Auxiliary
frequency）
The setting frequency source of the inverter
is maxium of
main frequency and
auxiliary
frequency
8
：
MIN
（
Main frequency
，
Auxiliary
frequency）
The setting frequency source of the inverter
is minium of main
frequency
and
auxiliary
frequency
9
：
Traverse operation
The setting frequency source of the inverter
is determined by traverse operation mode
defined by function code Pb parameter group.
P0.10 up/down setting store selection
Setting range
：
0
、
1
0
：Store
The initial frequency setting value is the value of parameter P0.11. It can
be changed by the terminal defined with function “
Frequency increase command‖ and
―Frequency decrease command‖. When the inverter is power off, the current
frequency setting
value is stored.
1：Not Store
The initial frequency setting value is the value of parameter P0.11. It can
be changed by the terminal defined with function “
Frequency increase command‖ and
―Frequency decrease command‖. When the inverter is power off, the current
frequency setting
value is not stored.
P0.11 digital frequency setting
Setting range: 0.00~High frequency limit
If digital frequency setting via panel is selected, the value of parameter, will be the present
preset frequency.
P0.12 Rotating direction
Setting range: 0, 1
If panel control mode is selected, select the relationship between inverter's actual output
direction and the direction of control command.
0:
Same with control command;
1:
Opposite to control command
