Hitech Nivelco Nivocap C-200, Installation And Programming Manual

Page: 8 / 36

8/36
♦
TÜV-A 03 ATEX 0019X
♦
cbr2052a0600p_01
TEMPERATURE DIAGRAM PRESSURE DIAGRAM
0
+70
+130
+45
+70 Tambient
-25
-30
T [
[
0
+70 +200
+45
+70 Tambient
T
[
-25
-30
[
STANDARD PROBE HIGH TEMPERATURE PROBE
œ  
ž Ÿ
¡ ¢
£ ¤
¥ ¦
¤
¦
¤
§ ¨
© ¨
ª ¨ § ¨
« ¬®­ ¯±° ² ¬´³¶µ · ¸ ¹
º » ¼ ½ ¾ ¼ ¿ ¾ ¼ À ¾
Á Â®Ã Ä Å Æ ÂKÇ È É$Ê
Ë Ì
3.1. A
DDITIONAL DATA FOR
E
X MODELS
Ex marking
II 1/2G EEx ia IIB T6
Intrinsical safe data
Ci
• 30 nF, Li • 100
µ
H, Ui • 30 V, Ii • 80 mA, Pi • 0,8 W
Power supply Uo < 30 V, Io < 80 mA, Po < 0,8 W.
3.2. C
ONDITIONS OF
E
X APPLICATION
Temperature table
1.
The unit should be powered by an intrinsically safe signal processor with [EEx ia IIB] or [EEx ia IIC] certification.
Temperature class T6
2.
The tank and the level measuring instrument shall be connected to an EP network with copper wiring q
≥
4 mm
2.
.
T
ambient
70 °C
3.
The Teflon coating of the rod and cable probes may be charged electrostatically, therefore:
T
medium
80 °C
•
the unit should only be used for level measurement of conductive medium and its specific resistance must not exceed 10
4
Ω
m, even under the most unfavourable
conditions and at the most unfavourable place.
•
method and the speed of filling or emptying of the tank should be selected in accordance with the medium properties.
•
the electronic circuitry of the probe is grounded. An equipotential network should be formed along the intrinsically safe circuit. Distance between the transmitter and the
intrinsically safe power supply (accommodated in the non -hazardous area) must not exceed 100 m.
3.3. SAP-202 D
ISPLAY MODULE
Display 6 digit LCD, engineering units and bargraph
Ambient temperature -25 °C … +70 °C
Enclosure PBT glass fibre reinforced plastic (DuPont

)