20/36
♦
TÜV-A 03 ATEX 0019X
♦
cbr2052a0600p_01
5.2.4 QUICKSET
Suggested for simple applications
Quick programming of the 4 basic parameters (like with programming without display module but) aided by images on the display. Measured values can only
be displayed in percentage.
QUICKSET can only be used in (%)(DEFAULT) mode (See
P01
in Full Parameter Programming 5.2.5).
Keys
Function
E
+ (min. 3 s)
Enter/Quit QUICKSET programming mode
+
LEARNING function
, ,
Adjustment of digit value (increase, decrease) moving blinking
E
Saving displayed value and step to the next screen
+
Reload value before modification (CANCEL)
E
+ (min 3 s)
Return to DEFAULT
+
Display DEFAULT
Screens
Actions
óô
õõõ§õ
Assignment of 4 mA to the minimum level , %
Fill the tank to the level required. After entering the Quickset programming mode the learning function can be started
with the double key pressing + . During learning the image „Store” then 0% is displayed.
The parameter value represents filling in %.
“Indirect” assigment of 4 mA to the minimum level with partially filled tank:
Following learning enter the momentary % value of level with the buttons.
The output current will be set in accordance % value.