7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
Section 6: Heli Programming Menu
88
89
Revo Mix
5. Scroll to highlight the “L/U” (left/up) field and press the jog
dial to activate the menu.
6. Rotate the jog dial to set the position for the tail rotor pitch
servo when the throttle stick is full down. Press the jog dial to
confirm your input.
4. Scroll to the “RATE” field and press the jog button to activate
the menu.
9. Scroll to highlight the “EXP” field and press the jog dial to
activate the menu.
10. Rotate the jog dial to increase (clockwise) or decrease
(counter-clockwise) the desired exponential value for this
mix. This value does not affect exponential throw of the
servo with rudder stick commands. Press the jog dial to
confirm your input.
7. Scroll to highlight the “R/D” (right/down) field and press the
jog dial to activate the menu.
8. Rotate the jog dial to set the position for the tail rotor pitch
servo when the throttle stick full up. Press the jog dial to
confirm your input.
11. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
12. Scroll to select a switch to activate the camber mix. Press the jog dial to confirm your selection.
a. If you choose the “NULL” option, revolution mix will remain active at all times for this model.
b. If you choose a switch:
- The switch position menu will appear. Scroll to highlight the
switch position that you will use to enable revolution mix.
Press the jog dial to confirm your selection.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the
top right corner of the screen will indicate when the mix is
active.
Revo Mix cont.
c. If you choose “Cond” (Flight Condition):
- The upper right field of the menu displays which flight
condition is currently active and will be programmed.
- Scroll to the Flight Condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial to
confirm your selection.
You may also select a flight condition in this menu by activating the desired flight condition.
Warning
Note
Tip
Tip
Tip
Caution
13. Repeat step 12b as applicable to define the REVO Mix for every flight condition.
14. Press the Back button to return to the Model Function menu.
To disable the revolution mix:
1. Scroll to highlight the “MIX” field in the Revolution Mix menu
and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the Back button to return to the Model Function menu.
Swash. Thro
A swash to throttle mix is typically used to increase main rotor RPM when a swash control command is
input to the helicopter. The increased RPM compensates for the loss of lift due to tilting the rotor.
1. From the Model menu, rotate the jog dial to highlight
“SWASH>THRO” and press the jog dial once to enter the
activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the swash-throttle
menu.
Summary of Contents for Flash7
Page 1: ......