7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
Section 3: System Menu Programming
38
39
Trim Step
The Trim Step screen is utilized to change the amount of movement seen on the servos with each
adjustment, or “beep” of the gimbal trim levers. Larger values equate to greater servo movement with
each trim adjustment.
1. From the System Menu scroll to TRIM STEP and press the jog
dial to enter the Trim Step Menu.
2. Scroll to the trim you want to adjust and push the jog dial to
activate the adjustment. Use the jog dial to change the value
and press it to confirm your entry. Trim Step adjustment
values are from 1~200.
3. Use the back button to exit the Trim Step Menu.
Trainer
The Flash 7 can be paired with another Hitec transmitter to create a master/slave setup that is useful
when instructing student pilots. The Flash 7 can be used to help teach students how to fly utilizing the
various trainer functions of the transmitter.
Utilizing the various trainer functions of the Flash 7, you can:
- Select which controls (RUDD, THRO, AIL, ect.) the student will command.
- Use the mix feature to give the student a percentage of the control throw while the master has the
remainder.
In addition to training, you can also use the Flash 7’s pass-through function to control head tracking
devices for First Person View flying.
The Flash 7 is compatible with all other Hitec transmitter products using the 3.2mm stereo plug.
Note
Tip
Tip
Tip
When using the Flash 7 in trainer mode, the following items must be verified before flying:
- The master radio must be programmed with the model to be flown.
- The slave or student transmitter must have the proper servo reverse and trim settings to match
the master transmitter.
Warning
Note
Tip
Tip
Tip
Caution
4. Press the back button return to the system menu.
Trainer cont.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select “ACT” (activate), then press the jog
dial to confirm your selection and activate the trainer menu.
6. Within the trainer menu, you can choose to limit the control
the student has for each channel by selecting one of the three
choices:
- NOR for full control.
- MIX for limited control.
- OFF for no Control.
4. Scroll to highlight “MODE” and press the jog dial to activate
the menu.
7. To adjust the level of control for any channel, scroll to the
channel you want to change and press the jog dial to activate
the selections.
8. Scroll to select “NOR”, “MIX”, or “OFF” and press the jog dial to
confirm your selection.
Within the trainer function menu you can choose to limit the control the student has by
selecting one of the three choices; NOR for full control, MIX for limited control or OFF for no Control.
Warning
Note
Tip
Tip
Tip
Caution
Within the trainer menu, you can set the Flash 7 as a “Master radio”, set the trainer switch and activate the
other features. To do this the transmitter must be in transmit mode. If not in the transmit mode the only
options you will have are the “pupil options.
To configure the trainer function:
1. From the system menu, scroll to highlight “TRAINER” and press
the jog dial once to enter the activation menu.
5. Scroll to select the number of channels the student radio
can control:
ALL – Gives the student access to all control channels 1~7.
STICK – Gives the student access only to the stick (gimbal)
channels 1~4.
Press the jog dial to confirm your selection
Summary of Contents for Flash7
Page 1: ......