7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 5: Acro and Glider Programming Menu
Section 5: Acro and Glider Programming Menu
68
69
Elev>Camb
18. Scroll to select “FLAP” and press the jog dial to confirm your
selection.
19. Repeat steps 5-15 to configure the flap movements for this
mix. If using only one flap servo, configure only the “FLAP”
row of the value table. If using two flap servos, configure
both rows of the value table.
20. Scroll to the “S/W” field and press the jog dial twice to
activate the menu.
21. Scroll to select a switch to activate the mix. Press the jog dial
to confirm your selection.
a. If you choose the “NULL” option, the mix will remain active at
all times for this model.
b. If you choose a switch:
- The switch position menu will appear. Scroll to highlight the
switch position that you will use to enable the mix. Press the
jog dial to confirm your selection
You may also select a flight condition in this menu by activating the desired flight condition.
Note
Tip
Tip
Tip
Caution
c. If you choose “Cond” (Flight Condition):
-The upper right field of the menu displays which flight
condition is currently active and will be programmed.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the
top right corner of the screen will indicate when the mix is
active.
- Scroll to the Flight Condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial to
confirm your selection.
- Repeat steps 4-18 to define the settings for each flight condition.
Elev>Camb cont.
22. Press the back button to return to the model function menu.
To disable the elevator-to-camber mix:
1. Scroll to highlight the “MIX” field in the elevator-camber mix
menu and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the back button to return to the model function menu.
To configure the camber mix:
1. From the Model menu, rotate the jog dial to highlight “Camber
Mix” and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select “ACT” (activate), then press the
jog dial to confirm your selection and activate the camber mix
menu.
4. Scroll to highlight the “AILE” field and press the jog dial to
activate the menu.
Camber Mix (GLID Only)
The Camber Mix feature allows you to define the camber of the wing airfoil by raising or lowering the
wing control surfaces in unison. You may also adjust the elevator neutral position in each setting to
maintain proper pitch trim.
5. Rotate the jog dial to input the desired travel for the “AILE”
servo when camber is active. Press the jog dial to conform
your input.
6. If the model has a second aileron servo, repeat step 5 in the
“AIL2” field.
7. Scroll to highlight the “ELEV” field and press the jog dial to
activate the menu.
8. Rotate the jog dial to input the desired travel for the “ELEV”
servo when camber is active. Press the jog dial to conform
your input.
9. If the model has a second elevator servo, repeat step 8 in the
“ELE2” field.
Summary of Contents for Flash7
Page 1: ......