7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 5: Acro and Glider Programming Menu
Section 5: Acro and Glider Programming Menu
74
75
B-Fly GLID Only
To configure butterfly:
1. From the model menu, rotate the jog dial to highlight “B-Fly”
and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select “ACT” (activate), then press the jog
dial to confirm your selection and activate the butterfly menu.
4. Scroll to highlight the “AILE” field and press the jog dial to
activate the menu.
5. Rotate the jog dial to input the desired travel for the “AILE”
servo when Butterfly is active. Press the jog dial to conform
your input.
6. If the model has a second aileron servo, repeat step 5 in the
“AIL2” field.
7. Scroll to highlight the “ELEV” field and press the jog dial to
activate the menu.
8. Rotate the jog dial to input the desired travel for the “ELEV”
servo when Butterfly is active. Press the jog dial to conform
your input.
9. If the model has a second elevator servo, repeat step 8 in the
“ELE2” field.
10. Scroll to highlight the “FLAP” field and press the jog dial to
activate the menu.
11. Rotate the jog dial to input the desired travel for the “FLAP”
servo when Butterfly is active. Press the jog dial to conform
your input.
12. If the model has a second flap servo, repeat step 11 in the
“FLP2” field.
13. Press the back button to return to the butterfly menu.
14. Scroll to highlight the “SPEED” field and press the jog dial to
activate the menu.
15. Scroll to define the amount of time (0.0 to 10.0 seconds) for
the butterfly mix to fully deploy. Press the jog dial to confirm
your selection.
B-Fly Glid Only cont.
16. Scroll to the “S/W” field and press the jog dial twice to
activate the menu.
17. Scroll to select a switch to activate the butterfly mix. Press
the jog dial to confirm your selection.
a. If you choose the “NULL” option, the butterfly mix will
remain inactive at all times for this model.
b. If you choose a switch:
- The switch position menu will appear. Scroll to highlight the
switch position that you will use to enable the mix. Press the
jog dial to confirm your selection.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the top
right corner of the screen will indicate when the mix is active.
18. Scroll to highlight the “T.STICK” field and press the jog dial to
activate the menu.
19. Scroll to select the movement type for the throttle stick.
Press the jog dial to confirm your selection.
The SPEED value is ignored when linear movement is selected.
Warning
Note
Tip
Tip
Tip
Caution
b. If you choose “DIV.” (divided), the mix will be applied fully
when the throttle position crosses a defined threshold:
a. If you choose “LINE” (linear) the mix will be applied
proportionally to throttle position. For fully linear
movement, verify that the throttle position menu shows
the mix to be on at both ends of the throttle range, and the
middle value is “100”.
- The throttle position menu will appear. Scroll to highlight
the throttle position that you will use to enable the mix.
Press the jog dial to confirm your selection.
- Scroll to select “ON” and press the jog dial to confirm your
selection.
Summary of Contents for Flash7
Page 1: ......