7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
Section 6: Heli Programming Menu
86
87
Gyro
4. Scroll to the “MODE” field and press the jog button to activate
the menu.
5. Scroll to select “Single” or “Dual” to denote whether your gyro
is a single-rate or dual-rate unit. Consult the gyro
manufacturer’s instructions if you are not sure. Press the jog
dial to confirm your selection.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the GYRO menu.
a. If you choose “Single”:
- Scroll to the “RATE1” field and press the jog button to activate
the menu.
- Scroll to dial in the desired amount of gyro gain (consult the
gyro manufacturer’s instructions for guidance).
b. If you choose “Dual”:
- Scroll to the “RATE1” field and press the jog button to activate
the menu. Show Gyro step 8 screen shot
- Scroll to highlight the value field and press the jog dial to
activate the selections.
- Scroll to dial in the desired amount of gyro gain (consult the
gyro manufacturer’s instructions for guidance).
- Scroll to highlight the function field (“Nor” or “T.lock”) and
press the jog dial to activate the menu.
- Scroll to select “Nor” (normal) or “T.lock” (throttle lock).
Throttle lock is used for bench testing the gyro rate
sensitivity.
6. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
7. Scroll to select a switch to activate the gyro rate mix. Press the jog dial to confirm your selection.
a. If you choose the “NULL” option, the set gyro rate will remain active at all times for this model.
Gyro cont.
b. If you choose a switch:
- The current switch position will be displayed next to the rate
in which is currently activated by the switch’s position. Show
Gyro step 12 screen shot.
- Repeat step 5a or 5b as applicable to define gyro rate for
every switch position.
c. If you choose “Cond” (Flight Condition):
- The upper right field of the menu displays which flight
condition is currently active and will be programmed.
- Scroll to the Flight Condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial to
confirm your selection.
You may also select a flight condition in this menu by activating the desired flight condition.
Warning
Note
Tip
Tip
Tip
Caution
- Repeat step 5a or 5b as applicable to define the gyro rate for
every flight condition.
To disable the Gyro:
10. Scroll to highlight the “MIX” field in the Gyro menu and press
the jog dial to activate the menu.
11. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
12. Press the Back button to return to the Model Function menu.
Revo Mix
The revolution mix is used to prevent yaw effects caused by changes in head speed or blade pitch on the
main rotor. It is not needed on helicopters equipped with a heading hold gyro.
To configure a revolution mix:
1. From the Model menu, rotate the jog dial to highlight “REVO
Mix” and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the GYRO menu.
Summary of Contents for Flash7
Page 1: ......