7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides
Section 2: Quick Start Guides
34
35
Additionally there are setups for delta wing type models (Elevon):
2AILE
2AILE+1FLAP
2AILE+2FLAP
5. Once you have selected you wing types press the jog dial to confirm your selection.
Model Type ACRO Menu Programming
6. Scroll to “TAIL” and press the jog dial to activate the menu. The
choices for tail type are dependent on the type of wing you
selected.
The tail types you may choose with the basic ACRO wing types are:
7. Select the tail type that your model has and press the jog dial to confirm your selection.
8. Use the back button to return to the system menu.
Model Type GLID Menu Programming
1. From the System Menu select
MDL TYPE.
2. Press the jog dial once to enter
the Model Type Selection Menu.
Scroll to model type GLID.
3. Press the jog dial again to enter
the GLID setup menu.
NORMAL:
Rudder is located on a vertical stabilizer and elevator is on a horizon stabilizer.
V-TAIL:
Two control surfaces in a V-configuration operate together providing both yaw (rudder) and pitch
(elevator) control.
Ailevator:
Each half of the elevator is controlled by a dedicated servo to provide pitch (elevator), and roll (aileron) control.
The tail choices if you chose one of the Delta Wing types are:
None: For Delta Wing Models without a rudder.
1Servo: For Delta Wing Models with a single rudder servo.
2Servo: For Delta Wing Models with dual rudder servos.
Model Type GLID Menu Programming cont.
6. Scroll to the Tail selection menu and press the jog dial to activate
the selections and scroll through the choices. The choices for tail
type are dependent on the type of wing you selected.
The tail types you may choose with the basic GLID wing types are:
NORMAL:
Rudder is located on a vertical stabilizer and elevator is on a horizon
stabilizer.
V-TAIL:
Two control surfaces in a V-configuration operate together providing
both yaw (rudder) and pitch
(elevator) contro.
Ailevator:
Each half of the elevator is controlled by a dedicated servo to provide
pitch (elevator), and roll (aileron) control.
The tail types you may choose with delta wing types are:
None: For Delta Wing Models without a rudder.
1Servo: For Delta Wing Models with a single rudder servo.
2Servo: For Delta Wing Models with dual rudder servos.
4. Once in the GLID setup menu you will set your wing and tail
choices. Scroll to the wing selection and press the jog dial to
activate the selections and scroll through the choices.
The choices for Normal GLID wing type are:
Additionally there are setups for Delta wing type models (Elevon):
2AILE
2AILE+1FLAP
2AILE+2FLAP
5. Once you have selected you wing type, press the jog dial to confirm your selection.
7. Select the tail type that your model has and press the jog dial to confirm your selection.
8. Press the back button to return to the system menu.
1AILE – Single aileron servo
1AILE+1FLAP – Single aileron servo and single flap servo
1AILE+2FLAP - Single aileron servo channel and two flap servos
2AILE – Two aileron servos
2AILE+1FLAP - Two aileron servos and one flap servo
2AIL+2FLAP - Two aileron servos and two flap servos
Summary of Contents for Flash7
Page 1: ......