English
9
SPECIFICATIONS
Type of power
Air motor revo Piston reciprocating
Air pressure (Gauge)
18 – 23 bar
Capacity (Applicable screw)
Collated screws: 25 – 41 mm
Amount of loadable screws
100 screws (1 coil)
Size
290 mm (L) × 300 mm (H) × 119 mm (W)
Weight 2.1
kg
Screw-feeding method
Piston reciprocation
Hose (inside diam.)
5 – 6 mm
STANDARD ACCESSORIES
(1) Eye protector ................................................................ 1
(2) Oiler .............................................................................. 1
(3) Nose cap ...................................................................... 1
(4) Bit (No. 2 plus bit) ......................................................... 1
(5) Bit changing tool ........................................................... 1
OPTIONAL ACCESSORY
For details, consult with your sales outlet.
(1) Stability guide
The stability guide attaches to the bottom of the magazine
to suppress vibration to the body and to stabilize the tool
while driving screws.
(2) Screw coil
Screws come in a variety of shapes and sizes, as
indicated in
Table 1
; refer to
Table 1
to select the screw
most appropriate for your application.
NOTE
○
When driving screws in steel studs, use the genuine
Hitachi steel stud screws in
Table 1
.
If any other screws are used, they may not drive properly.
○
Using them may cause improper driving (come out,
sticking up) or damage (strip the bit or head of the screw),
so do not use any screws but those speci
fi
ed.
* Come out: Bit fails to engage with the head of the screw,
thus spinning out and failing to screw into the material.
L
d
D
Table 1 Dimensions and shape of collated screws/Application chart
Application
Screw dimesions
Gypsum board thickness (mm)
Length L
(mm)
Dia. D
(mm)
Dia. d
(mm) t9.5 t12.5 t15
t9.5 + t9.5
(double layer)
t12.5 + t12.5
(double layer)
Fastening gypsum board to steel studs
(Steel studs 0.8mm max thickness)
25
8.0
3.5
○
○
×
×
×
28
○
○
○
×
×
41
×
×
×
○
○
Fastening gypsum board to wood studs
25
3.9
○
×
×
×
×
28
○
○
×
×
×
32
×
○
○
○
×
41
×
×
×
○
○
○
: can be used
Fastening plywood to wood studs
28
7.0
3.7
×
:
cannot be used
32
41
CAUTION
When selecting screws, always refer to
Table 1
.
application chart.
If an inappropriate screw is used, the driver will not
perform as designed.
NOTE
The maximum thickness of a steel stud that can be used
with this driver is 0.8 mm.
If you try to drive into a thicker stud or in a place where
studs overlap, it may not drive into them.
(3) Bits
No. 2 Phillips bit (comes with 5)
01Eng̲WF4H2̲WE.indd 9
01Eng̲WF4H2̲WE.indd 9
2012/04/18 14:34:33
2012/04/18 14:34:33
