Hitachi UX2 Series Instruction Manual Download

Page: 158 / 300

Chapter 7. Auxiliary Functions

7-2

This chapter describes auxiliary functions of this unit.

(1) Functions

Auxiliary function item list

Item

Description

Reference

Manage messages

●

Performs message name change, deletion, save number

change, group change of saved messages, and preview.

7.1.

Manage group

●

Performs name change, deletion, and number change of a

group that classifies and manages messages.

7.2.

Create user pattern

●

Creates and edits user patterns (saved characters).

7.3.

Copy data IJP→USB

●

Backs up messages and user patterns to USB.

7.4.

Copy data USB→IJP

●

Copies backed up data to the IJ printer.

7.4.

Edit Standard pattern

●

Edits patterns of standard characters.

7.5.

Edit substitution rule

●

Edits calendar substitution rules.

7.6.

Select Languages

●

Switches the display language.

7.7.

Widget edit

●

EDIT the layout in the [HOME] screen.

7.8.

(2) Operation

Press Setting on the print description screen.

The [Setting] menu appears.

[Home] (print description) screen (Setting menu)

Summary of Contents for UX2 Series













































































































































































































































































































Search results

Summary of Contents for UX2 Series

Reviews:

Related manuals for UX2 Series

Brands by name

Popular brands

Hitachi UX2 Series, Instruction Manual

Search results

Summary of Contents for UX2 Series

Reviews:

Related manuals for UX2 Series

Brands by name

Popular brands